Message-Id: [email protected]> To: adamg Subject: test Status: R This is only a test!
Whoa! What is all that stuff? It"s your message with a postmark gone mad. Just as the postal service puts its marks on every piece of mail it handles, so do Net postal systems. Only it"s called a "header" instead of a postmark. Each system that handles or routes your mail puts its stamp on it. Since many messages go through a number of systems on their way to you, you will often get messages with headers that seem to go on forever. Among other things, a header will tell you exactly when a message was sent and received (even the difference between your local time and Greenwich Mean Time -- as at the end of line 4 above).
If this had been a long message, it would just keep scrolling across and down your screen -- unless the people who run your public- access site have set it up to pause every 24 lines. One way to deal with a message that doesn"t stop is to use your telecommunication software"s logging or text-buffer function. Start it before you hit the number of the message you want to see. Your computer will ask you what you want to call the file you"re about to create. After you name the file and hit enter, type the number of the message you want to see and hit enter. When the message finishes scrolling, turn off the text-buffer function. The message is now saved in your computer.
This way, you can read the message while not connected to the Net (which can save you money if you"re paying by the hour) and write a reply offline.
But in the meantime, now what? You can respond to the message, delete it or save it. To respond, type a lowercase r and hit enter. You"ll get something like this:
To: adamg Subject: Re: test
Note that this time, you don"t have to enter a user name. The computer takes it from the message you"re replying to and automatically addresses your message to its sender. The computer also automatically inserts a subject line, by adding "Re:" to the original subject. From here, it"s just like writing a new message. But say you change your mind and decide not to reply after all. How do you get out of the message? Hit control-C once. You"ll get this:
(Interrupt -- one more to kill letter)
If you hit control-C once more, the message will disappear and you"ll get back to your mail"s command line.
Now, if you type a lowercase d and then hit enter, you"ll delete the original message. Type a lowercase q to exit your mailbox.
If you type a q without first hitting d, your message is transferred to a file called mbox. This file is where all read, but un-deleted messages go. If you want to leave it in your mailbox for now, type a lowercase x and hit enter. This gets you out of mail without making any changes.
The mbox file works a lot like your mailbox. To access it, type
mail -f mbox
at your host system"s command line and hit enter.
You"ll get a menu identical to the one in your mailbox from which you can read these old messages, delete them or respond to them. It"s probably a good idea to clear out your mailbox and mbox file from time to time, if only to keep them uncluttered.
Are there any drawbacks to e-mail? There are a few. One is that people seem more willing to fly off the handle electronically than in person, or over the phone. Maybe it"s because it"s so easy to hit r and reply to a message without pausing and reflecting a moment.
That"s why we have smileys (see section 2.4)! There"s no online equivalent yet of a return receipt: chances are your message got to where it"s going, but there"s no absolute way for you to know for sure unless you get a reply from the other person.
So now you"re ready to send e-mail to other people on the Net.
Of course, you need somebody"s address to send them mail. How do you get it?
Alas, the simplest answer is not what you"d call the most elegant: you call them up on the phone or write them a letter on paper and ask them. Residents of the electronic frontier are only beginning to develop the equivalent of phone books, and the ones that exist today are far from complete (still, later on, in Chapter 6, we"ll show you how to use some of these directories).
Eventually, you"ll start corresponding with people, which means you"ll want to know how to address mail to them. It"s vital to know how to do this, because the smallest mistake -- using a comma when you should have used a period, for instance, can bounce the message back to you, undelivered. In this sense, Net addresses are like phone numbers: one wrong digit and you get the wrong person. Fortunately, most net addresses now adhere to a relatively easy-to-understand system.
Earlier, you sent yourself a mail message using just your user- name. This was sort of like making a local phone call -- you didn"t have to dial a 1 or an area code. This also works for mail to anybody else who has an account on the same system as you.
Sending mail outside of your system, though, will require the use of the Net equivalent of area codes, called "domains." A basic Net address will look something like this:
[email protected]
Tomg is somebody"s user ID, and he is at (hence the @ sign) a site (or in Internetese, a "domain") known as std.com. Large organizations often have more than one computer linked to the Internet; in this case, the name of the particular machine is world (you will quickly notice that, like boat owners, Internet computer owners always name their machines).
Domains tell you the name of the organization that runs a given e-mail site and what kind of site it is or, if it"s not in the U.S., what country it"s located in. Large organizations may have more than one computer or gateway tied to the Internet, so you"ll often see a two-part domain name; and sometimes even three- or four-part domain names.
In general, American addresses end in an organizational suffix, such as ".edu," which means the site is at a college or university.
Other American suffixes include:
.com for businesses .org for non-profit organizations .gov and .mil for government and military agencies .net for companies or organizations that run large networks.
Sites in the rest of the world tend to use a two-letter code that represents their country. Most make sense, such as .ca for Canadian sites, but there are a couple of seemingly odd ones. Swiss sites end in .ch, while South African ones end in .za. Some U.S. sites have followed this international convention (such as well.sf.ca.us).
You"ll notice that the above addresses are all in lower-case.
Unlike almost everything else having anything at all to do with Unix, most Net mailing systems don"t care about case, so you generally don"t have to worry about capitalizing e-mail addresses. Alas, there are a few exceptions -- some public-access sites do allow for capital letters in user names. When in doubt, ask the person you want to write to, or let her send you a message first (recall how a person"s e-mail address is usually found on the top of her message). The domain name, the part of the address after the @ sign, never has to be capitalized.
It"s all a fairly simple system that works very well, except, again, it"s vital to get the address exactly right -- just as you have to dial a phone number exactly right. Send a message to [email protected] (which is the University of New Mexico) when you meant to send it to [email protected] (the University of Minnesota), and your letter will either bounce back to you undelivered, or go to the wrong person.
If your message is bounced back to you as undeliverable, you"ll get an ominous looking-message from MAILER-DAEMON (actually a rather benign Unix program that exists to handle mail), with an evil-looking header followed by the text of your message. Sometimes, you can tell what went wrong by looking at the first few lines of the bounced message. Besides an incorrect address, it"s possible your host system does not have the other site in the "map" it maintains of other host systems. Or you could be trying to send mail to another network, such as Bitnet or CompuServe, that has special addressing requirements.
Sometimes, figuring all this out can prove highly frustrating.
But remember the prime Net commandment: Ask. Send a message to your system administrator. He or she might be able to help decipher the problem.
There is one kind of address that may give your host system particular problems. There are two main ways that Unix systems exchange mail. One is known as UUCP and started out with a different addressing system than the rest of the Net. Most UUCP systems have since switched over to the standard Net addressing system, but a few traditional sites still cling to their original type, which tends to have lots of exclamation points in it, like this:
uunet!somesite!othersite!mybuddy
The problem for many host sites is that exclamation points (also known as "bangs") now mean something special in the more common systems or "sh.e.l.ls" used to operate many Unix computers. This means that addressing mail to such a site (or even responding to a message you received from one) could confuse the poor computer to no end and your message never gets sent out. If that happens, try putting backslashes in front of each exclamation point, so that you get an address that looks like this:
uunet!somesite!othersite!mybuddy
Note that this means you may not be able to respond to such a message by typing a lowercase r -- you may get an error message and you"ll have to create a brand-new message.
If you want to get a taste of what"s possible through e-mail, start an e-mail message to
[email protected]
Leave the "subject:" line blank. As a message, write this:
send quote
Or, if you"re feeling a little down, write this instead:
send moral-support
In either case, you will get back a message within a few seconds to a few hours (depending on the state of your host system"s Internet connection). If you simply asked for a quote, you"ll get back a fortune-cookie-like saying. If you asked for moral support, you"ll also get back a fortune-cookie-like saying, only supposedly more uplifting.
This particular "mail server" is run by Oregon State University.
Its main purpose is actually to provide a way to distribute agricultural information via e-mail. If you"d like to find out how to use the server"s full range of services, send a message to its address with this line in it:
send help
You"ll quickly get back a lengthy doc.u.ment detailing just what"s available and how to get it.
Feeling opinionated? Want to give the President of the United States a piece of your mind? Send a message to [email protected]
Or if the vice president will do, write [email protected]
The "mail" program is actually a very powerful one and a Netwide standard, at least on Unix computers. But it can be hard to figure out -- you can type a question mark to get a list of commands, but these may be of limited use unless you"re already familiar with Unix.
Fortunately, there are a couple of other mail programs that are easier to use.
2.2 ELM -- A BETTER WAY
Elm is a combination mailbox and letter-writing system that uses menus to help you navigate through mail. Most Unix-based host systems now have it online. To use it, type
elm
and hit enter. You"ll get a menu of your waiting mail, along with a list of commands you can execute, that will look something like this:
Mailbox is "/usr/spool/mail/adamg" with 38 messages [ELM 2.3 PL11]